Before and after exterior wash of a home entryway by H2O Pressure Washing

Can You Pressure Wash a Brick House?

November 22, 2026

Yes, a brick house can be cleaned, but it should be washed with low pressure and a cleaning solution rather than blasted with a high pressure tip. Brick itself is tough, but the mortar joints between the bricks are softer and can be eroded by concentrated pressure. A soft wash approach kills the mildew and algae and rinses the dirt away while leaving the mortar intact.

Why brick needs a gentler approach than it looks like it needs

Brick feels indestructible, so it is tempting to treat it like a driveway. The problem is what holds it together. Mortar is a mix of sand, cement and lime, and it is noticeably softer than the fired clay around it. Older mortar, the kind you find on many of the established brick ranch homes around Mandarin, can be softer still after decades of rain and sun.

A narrow, high pressure stream aimed at a mortar joint cuts into it the same way it would cut into soft wood. Once the joint is recessed or sandy, water gets behind the face of the brick more easily, and that is where the real long term damage starts. Brick faces can also chip or lose their fired surface if a tip is held too close, which leaves pale scars that never match the rest of the wall.

What actually makes brick look dirty in Northeast Florida

On most brick homes here the dark staining is not dirt at all. It is algae and mildew, the same growth that turns siding and driveways green and black. Brick is porous and holds moisture, and our humid summers, shady oaks and afternoon storms give that growth everything it wants. North facing walls and the sections behind shrubs usually look the worst.

Other common marks include red clay and mulch splashed up along the bottom course after heavy rain, rust streaks from irrigation that hits the wall, and white chalky deposits. Each one needs a slightly different treatment, which is why a single pass with a pressure wand rarely gives an even result. If you are not sure what you are looking at, our guide to mold, mildew or algae on your house explains the differences.

How we clean brick without hurting it

The method is the same principle we use on stucco and painted surfaces. The house is wet down first, plants are protected, and a cleaning solution is applied at low pressure so it can soak into the brick and kill growth down in the pores. After it has had time to work, the wall is rinsed at a pressure that moves water and loosened debris without attacking the mortar.

Because the solution does the heavy lifting, the result is more even and lasts longer than blasting. Pressure only removes what it can reach on the surface. The solution reaches the roots of the growth inside the brick, which is why a properly washed brick wall stays clean for much longer. You can read more about the difference in soft washing vs pressure washing.

Things to check before your brick gets washed

Walk around the house and look closely at the mortar. If you can scratch sand out of a joint with a fingernail, or you see open gaps, it is worth knowing before any washing happens. Washing does not cause those gaps, but water finds them, and they may need a mason's attention.

Check windows and doors as well. Older homes sometimes have tired caulking around frames set into brick, and water from washing can find its way through gaps that rain usually does not reach at the same angle. Closing everything firmly and pointing out any trouble spots helps the job go smoothly.

Painted brick is a separate case. Paint can be lifted by aggressive pressure, so painted brick is always treated like any other painted surface, with low pressure and the right solution.

When to wash a brick home in Mandarin

Most brick homes here do well with a wash every year or so, sooner on walls under heavy tree cover or near the river where moisture hangs around. Spring, after the worst of pollen season, is a popular time because it clears the yellow film and the winter mildew in one visit. If you are planning to sell or have family coming for the holidays, a wash is one of the quickest ways to make an older brick home look cared for.

Our exterior cleaning services cover full house washing, and we work throughout Mandarin and the rest of Jacksonville's southside.

Frequently asked questions

Will pressure washing damage the mortar in my brick?

High pressure aimed at mortar joints can erode them, especially on older homes. Low pressure with a cleaning solution cleans brick without wearing the mortar away.

Why does my brick have black or green stains?

Those are almost always algae and mildew. Brick holds moisture, and Florida humidity and shade let growth settle into the pores. A cleaning solution kills it at the root.

Can you remove red clay stains from the bottom of brick walls?

Usually yes. Soil and mulch splash from heavy rain often comes off with the right solution and a careful rinse. Very old or deep staining may lighten rather than fully disappear.

Is it safe to wash painted brick?

Yes, as long as it is treated like any painted surface. That means low pressure and a suitable solution so the paint is cleaned rather than stripped.

Who washes brick homes in Mandarin, FL?

H2O Pressure Washing cleans brick homes in Mandarin using low pressure and a cleaning solution that protects the mortar. Call (904) 506-7656 for a free quote.

Get a free estimate in Mandarin, FL

H2O Pressure Washing is a family-owned pressure and soft washing company based in St. Johns, FL, serving St. Johns County, Jacksonville and Clay County. Call (904) 506-7656, see the service, or request a free quote. More answers on the H2O blog.

Back to Blog
H2O Pressure Washing · Saint Johns, FL

Want a quote for your property?

Family-owned, based in Saint Johns, FL, with 10+ years in St. Johns County. Send the form below, or call or text a few photos and we will get you a free, no-obligation quote.