Before and after cleaning of a front step and walkway by H2O Pressure Washing

Why Won't the Black Spots on My Concrete Come Off?

November 22, 2026

Black spots that stay on concrete after a wash are usually lichen or dense mold and algae colonies that have rooted into the pores, not surface dirt. Pressure knocks off the top but leaves the roots, so the spots stay dark or return quickly. They need a treatment that kills the growth and time for it to work, often followed by a second application.

What those black spots usually are

On Northeast Florida driveways, walkways and patios, small round black or dark gray spots are most often lichen. Lichen is a partnership between a fungus and algae, and it grips concrete tightly. It grows slowly, in rough circles, and it shows up most on shaded concrete that stays damp, which describes a lot of walkways under the live oaks around Fleming Island.

Other dark spots can be dense mold or algae colonies, decaying leaf or acorn stains, or drips from trees and roofs. Leaf and acorn stains tend to be brown and shaped like the leaf, and our post on acorn and leaf stains on concrete covers those. The black, crusty, round spots are the stubborn ones.

Why a normal wash does not remove them

Most surface growth sits on top of the concrete, so an even pass with a surface cleaner lifts it. Lichen and well established colonies anchor into the pores of the concrete. Pressure removes the visible top layer, but the anchored part stays, leaving a faint dark shadow. Within weeks the spot looks almost the same as before.

This is why some homeowners rent a pressure washer, spend an afternoon on the driveway, and find the overall slab cleaner but still covered in dots. Turning the pressure up to chase them tends to etch the concrete around each spot, which creates pale rings and an uneven finish.

How the spots are actually removed

The fix is treatment, not force. After the main cleaning, the remaining spots get a post treatment with a solution that kills the organism down in the pores. It needs time to dwell. Many spots will lighten over the following days as the dead growth breaks down and rain rinses it away. Heavily colonized areas may need a second treatment.

Some very old spots leave a faint mark even after the growth is dead, because they have stained the concrete itself. In those cases the spot is usually much lighter, and further treatment can improve it, but it is honest to say a ghost may remain on concrete that has hosted lichen for many seasons. Our concrete cleaning services include pretreatment and post treatment for this reason.

Keeping black spots from coming back

Shade and moisture are what lichen and mold need, so reducing them helps. Trim back branches that keep walkways in constant shade, clear leaves and debris promptly so they do not sit damp on the concrete, and point sprinklers away from paths and patios.

Regular cleaning before spots establish is much easier than removing mature colonies. For a full plan between visits, see how to keep your driveway clean between pressure washings. Sealing clean concrete can also slow growth by reducing how much moisture the surface holds.

Black spots vs green driveways

A driveway turning green across large areas is usually a thin layer of algae that comes off fairly easily. Black spots are a slower, tougher kind of growth that needs more patience. Many driveways have both, and a good cleaning plan treats each one the right way rather than using maximum pressure on everything. Our post on why Florida driveways turn green explains the green side of the story.

Frequently asked questions

What are the black dots on my driveway?

Most often they are lichen or dense mold colonies rooted in the concrete. They grow in rough circles, mostly on shaded, damp areas.

Why did black spots stay after I pressure washed?

Pressure removes the top of the growth but not the part anchored in the pores. A post treatment that kills the growth is needed.

Will higher pressure remove black spots?

Usually not without damage. Turning up pressure tends to etch pale rings around each spot while the root stays behind.

How long do treated spots take to fade?

Many lighten over several days as the dead growth breaks down and rain rinses it. Heavy colonies may need a second treatment.

Who removes black spots from concrete in Fleming Island, FL?

H2O Pressure Washing treats and removes black spots from driveways and walkways in Fleming Island and Clay County. Call (904) 506-7656 for a free quote.

Get a free estimate in Fleming Island, FL

H2O Pressure Washing is a family-owned pressure and soft washing company based in St. Johns, FL, serving St. Johns County, Jacksonville and Clay County. Call (904) 506-7656, see the service, or request a free quote. More answers on the H2O blog.

Back to Blog
H2O Pressure Washing · Saint Johns, FL

Want a quote for your property?

Family-owned, based in Saint Johns, FL, with 10+ years in St. Johns County. Send the form below, or call or text a few photos and we will get you a free, no-obligation quote.